Metal Roofing in Tulsa, OK

Asphalt Shingle Roofing Metal Roofing Standing Seam Metal Roof Metal Roof Retrofit Clay Tile Roofing Concrete Tile Roofing Slate Roof Repair Wood Shake Roofing All Services

Metal roofs handle Oklahoma wind well, reflect heat better than dark shingles and can last for decades. The price range is wide, so the right choice depends on the building and your expectations.

Exposed-fastener panels are economical and suit shops and outbuildings. Standing seam hides fasteners and allows for thermal movement, so it's generally the better choice on a home. Stone-coated steel gives a shingle or tile look.

Common signs we check for:

Metal Roofing prices

Planning ranges for the Tulsa area, updated November 2026. They include typical labor and materials, but they are not a quote. Your written estimate is based on an inspection of the actual job. See every category on our price list.

• Exposed-fastener panels, per sq ft

  $6 - $10

• Metal shingles or stone-coated steel, per sq ft

  $9 - $16

• Standing seam, per sq ft

  $12 - $20+

• Panel repair or reattachment

  $500 - $2,500

• Fastener replacement, per sq ft

  $1.50 - $4

• Full metal roof, typical home

  $12,000 - $40,000

Types of metal roofing

Metal roofing covers a wide range of products with different looks and price points. These are the ones we are asked about most in the Tulsa area:

• Exposed-fastener panels: screws go through the face of the panel. They are economical and common on shops, barns and some homes, but the screws and washers need upkeep.
• Standing seam: concealed clips and raised seams allow panels to expand and contract, with a clean, modern look.
• Metal shingles: stamped to look like shake, slate or tile, a way to get metal performance with a traditional appearance.
• Stone-coated steel: steel panels with a granular surface that hides dents better and looks similar to tile or shake.

Steel is the usual base metal around here. Aluminum resists corrosion well, while copper and zinc are premium materials used more for accents.

Metal vs asphalt shingles

The biggest decision is usually whether the extra cost pays back. Metal costs more upfront, often about two to three times a shingle roof. In exchange, it often lasts 40 years or more with limited upkeep, as well as sheds rain and snow quickly. Reflective finishes can reduce heat gain in summer. It can also be a good fit if you plan to stay long term or if you want to install solar, since a standing seam roof allows clamp-on mounting without roof penetrations.

Shingles still make sense for many homes, especially if you may sell in a few years, or if hail-related claims are likely to recur. Compare the two with our shingle roofing page and price list. We are happy to price both on the same roof so you can decide with real numbers.

Hail, wind and noise

Hail is the first question in Oklahoma. Metal rarely leaks from hail, but it can dent, especially with thin panels or large stones. Thicker gauges, textured finishes and stone coatings hide dents better. Check your insurance policy too, since many carriers now exclude cosmetic damage to metal roofs. That means dents that do not affect function may not be paid for. Read about this on our hail damage roof repair page.

Wind performance depends on panel attachment and edge details. Properly installed metal systems resist wind well, while loose trim is a usual failure point. Noise concerns are mostly a myth for residential roofs: with solid decking and underlayment, rain sounds much like it does on any other roof.

Common metal roof problems we fix

Metal roofs are durable, but they are not maintenance-free. These issues show up most often:

• Backed-out or worn fasteners, particularly on exposed-fastener systems where rubber washers age in the sun.
• Failed sealant at laps, ridge caps and penetrations.
• Loose ridge and rake trim after wind events.
• Rust at cut edges, scratches or where dissimilar metals touch.
• Oil-canning, the visible waviness in flat panels, which is usually cosmetic.
• Leaks at pipe boots and roof curbs that were poorly detailed.

For older roofs, re-screwing and coating or a metal roof retrofit can often add years at a lower cost than replacing the panels. Commercial buildings may also benefit from a roof coating.

What goes into a good metal install

Metal is unforgiving, as small errors at transitions tend to become leaks. We look at the panel gauge and coating (Kynar or similar paint finishes hold color well), the underlayment and how panels are fastened. Good details include sealed closures at ridges and eaves, flashing designed to allow movement, and panel lengths that account for expansion on hot Oklahoma days. Whether a metal roof can go over an existing shingle layer depends on code, weight and the condition of the deck. We usually recommend removal so the deck can be inspected, but we will explain the trade-offs.

Related services

Our metal work ranges from panels on shops to standing seam roofs on homes. Older metal buildings can often be saved with a metal roof retrofit. If you are comparing materials for a new roof, see roof replacement in Tulsa, and for business properties see commercial roofing.

See all of our roofing projects

Frequently asked questions